Friss Adatvédelmi és cookie-kra vonatkozó szabályzatunban megtalálod, hogyan gondoskodunk adataid védelméről. Oldalainkon HTTP-sütiket használunk a jobb működésért.

TEAC TN-400BT Bakelit lemezjátszó Bluetooth-szal

179.900 Ft (141.654 Ft + ÁFA)
Elérhetőség: Előrendelhető
Szállítási díj: Ingyenes


TEAC TN-400BT Bakelit lemezjátszó Bluetooth-szal

TEAC TN-400BT Bakelit lemezjátszó Bluetooth-szal

Main Features 

High-quality Bluetooth® aptX® wireless audio transmission

Available in a selection of contemporary matt finishes or a natural walnut veneer

3-speed (including 78rpm) belt-drive mechanism with aluminum die-cast platter

Newly-developed low-friction spindle for stable rotational speed 

Static-balanced S-shaped tone-arm with universal headshell

Fitted audio-technica MM-type cartridge (AT95E) 

Built-in Phono EQ Amplifier with subsonic filter

16-bit/48kHz USB digital output for PC recording

Gold-plated RCA Jacks for LINE/PHONO output
Dimensions (W x H x D) / NW 420 x 117 x 356 mm 

Package Dimensions (W x H x D) / GW 555 x 220 x 430 mm

Overview The TN-400BT is an analog turntable that also allows users to listen to LP records wirelessly via Bluetooth® headphones & speakers. A die-cast aluminium platter provides accurate rotational speed while an S-shaped static-balanced aluminum tone-arm provides accurate tracking. The built-in Phono EQ amplifier enables the TN-400BT to be connected to a conventional hi-fi amplifier or a micro hi-fi, while a universal-type headshell allows users to change cartridges with ease.  
A built-in Bluetooth® transmitter also lets users listen to LP records wirelessly with high-quality audio (thanks to the the aptX® and AAC codecs). A USB output, meanwhile, enables users to digitally archive their records on a PC at 16-bit/48kHz resolution (equivalent to CD quality). For  convenience, a quality Japanese-made moving magnet-type cartridge comes pre-installed, so users can quickly start enjoying their records without a lengthy set-up procedure.
Aluminum die-cast platter with 3-speed belt-drive  A die-cast, high-inertia aluminum platter is driven by a high-torque DC motor via a durable rubber flat-belt, giving immensely stable playback at 33-1/3, 45 and 78 rpm speeds.

New low-resistance spindle  A precisely-machined stainless steel spindle and durable brass bearing maintain accurate rotational speed, thanks to reduced friction.

New matt and natural walnut veneer finishes The TN-400BT is available in four matt finishes, as well as a natural walnut veneer finish.
Built-in Phono EQ amplifier The TN-400BT has an onboard Phono EQ amplifier that supports MM-type cartridges, allowing the deck to be connected to conventional amplifiers/micro systems that lack a dedicated turntable input. The Phono EQ amplifier employs a hi-fi quality NJM8080 op-amp chip (designed by JRC) which amplifies the tiny audio signal from the stylus with the minimum of distortion.
New subsonic filter for improved sound By filtering out the frequencies below 18Hz the TN-400BT prevents excess LF signal levels being sent to amplifiers, presenting an easier electrical load to any connected speakers. This filter is particularly effective when playing back warped vinyl records which would otherwise induce undesirable woofer movement (The subsonic filter is off when Phono EQ is THRU).
USB digital audio output The TN-400BT also incorporates an A/D Converter that delivers a 16-bit/48kHz resolution digital audio signal via a rear-mounted USB port. This allows records to be digital archived on a PC. Once converted, users can then easily transfer the recordings onto devices such as smartphones and car CD players
S-shaped static-balanced tone-arm The S-shaped, static-balanced aluminum tone-arm is equipped with a counterweight and anti-skating mechanism that allow an exact setting of balance as well as tracking pressure, ensuring accurate tracking during playback. A tone-arm lifter is also fitted for smooth lowering
October 7, 2016 Supplemental to New Product Information (SNPI) 3of the tone-arm onto records.
The tone-arm takes universal-type headshells so users can change cartridges with relative ease. In order to reduce signal losses between the tone-arm and the headshell, gold-plated contact points are employed, to help deliver an uncorrupted audio signal.
Bluetooth® wireless audio streaming with aptX® codec The TN-400BT’s Bluetooth® wireless transmission system supports the higher quality aptX® and AAC codecs, as well as the conventional SBC codec. This means that even if users don't have a hi-fi system, then can still enjoy truly high-quality vinyl replay via  Bluetooth®-equipped headphones or speakers.
Connecting the TN-400BT to Bluetooth® headphones or speakers is achieved very simply, at the touch of a button. A single-function pairing key and an associated LED indicator provide simple and clear confirmation of the connection status.  
Beautifully detailed The TN-400BT brings elegance to the process of playing a record. The machined aluminum operation knobs ooze quality while the aluminum feet, attached to high-density MDF chassis via shock-absorbing rubber, provide a high resistance to feedback.
MM-type Cartridge from audio-technica  The deck comes with an excellent, all-purpose MM cartridge, employing a lightweight aluminum cantilever, that helps deliver an accurate, highly musical standard of playback.
Specifications of the Cartridge Model of Cartridge audio-technica AT95E Type of Cartridge MM-type (VM-type) Frequency Response 20 Hz to 20,000 Hz Output Voltage 3.5mV (1kHz, 5cm/sec.) Channel Separation 20 dB (1kHz) Output Balance 2.0 dB (1kHz) Needle Pressure 1.5 g to 2.5 g (appropriate value: 2.0 g) Coil Impedance 2.8k ohms (1kHz) DC Resistance 410 ohms Loading Resistance 47k ohms Loading Capacity 100 to 200 pF Coil Inductance 400m H (1kHz) Static Compliance 20 x 10-6cm/dyne Dynamic Compliance 6.5 x 10-6cm/dyne (100Hz) Needle Shape Joint-oval 0.3 x 0.7 mil Cantilever Aluminum Pipe Vertical Tracking Degree 20 degrees Overall Dimensions 17.0 x 17.2 x 30.5 mm (W x H x D) Weight 5.7 g
October 7, 2016 Supplemental to New Product Information (SNPI)

Features at-a-glance

Robust high-density MDF plinth provides both vibration isolation and elegance

Available in a selection of contemporary matt finishes, or a natural walnut veneer

3-speed belt-drive mechanism with aluminum die-cast platter (33-1/3, 45, 78 rpm)

Newly-developed low-resistance spindle for stable rotational speed

Static-balanced S-shaped tone-arm with universal-type headshell

Pre-installed MM-type AT95E cartridge from audio-technica 

Built-in Phono EQ Amplifier with subsonic filter (off when THRU)

Built-in TI A/D Converter allows 16-bit/48kHz USB digital output for PC recording

High-quality Bluetooth® aptX® wireless audio transmission

Floating-construction using decoupled feet provides high feedback resistance

Machined aluminium operation knobs and feet

Gold-plated RCA jacks (for LINE/PHONO output) and tone-arm contacts

GND terminal on rear panel

RCA audio cable with GND wiring included

■ Specifications
Turntable section  Type Belt Drive   

Motor DC Motor  

Rotation Speeds 33-1/3, 45, 78 rpm  

Deviation of Speed +/-2% 

Wow-and-Flutters 0.2%  

Signal-to-Noise Ratio more than 67 dB (A-weighted)    

60 dB (unweighted, 20kHz, LPF) 

Turntable (Platter)   

Material Aluminum Die-cast  

Diameter 30 cm
Tone-arm section  Type S-shaped,


Effective Length 223 mm 

Needle Pressure Range 0 to 5 g 

Compatible Cartridge Weight 4 to 8 g  14 to 18 g (including Head-shell)
Head-shell and Cartridge sections  Type MM-type (VM-type) 

Output Voltage 3.5 mV (1kHz, 5cm/sec.) 

Needle Pressure 2.0 g (+/-0.5 g) 

Cartridge Weight 5.7 g (+/-0.5 g) 

Head-shell Weight 10 g (including nuts, screws, and wires) 

Needle Life approx. 300 hours (depends on conditions)
Analog Output section 

Connectors RCA jack x 1 pair (Gold-plated) 

Output Voltage   PHONO 3.5 mV (+/-3dB)  

LINE 155 mV (-16dB)
Digital Output section 

Connectors USB B-type (Full-speed, Plug-in Power required) 

Audio Format PCM 16-bit/48kHz 

Required USB Bus Power 5V 500 mA
General  Operation Power   AC Adapter Input AC 100-240V, 50/60Hz  

AC Adapter Output DC 12V 500mA 

Power Consumption 1.5 Watts or less  Standby Power 0.5 Watts or less  

Overall Dimensions (W x H x D)   420 × 117× 356 mm / 16.5” x 4.6” x 14.0” 

Weight (Net) 4.9 kg / 10.8 lbs.  

Operating Temperature +5˚C to +35˚C  

A TEAC név a világon mindenhol megegyezik a kimagasló hifi és házimozi komponenssel. Nem meglepô, ha a TEAC termékek már 1953 óta, a cég elsô orsós magnójának megjelenése óta a piac egyik vezetôjévé váltak. 

A japán TEAC cég folyamatosan részt vett a zene és a hang rögzítési és tárolási technológiáinak fejlesztésében. Termékeik lenyûgözô sorozata az elmúlt 50 évben nagy hatással volt életünkre. Ha TEAC készülékén zenét hallgat, szinte biztos, hogy azt egy olyan stúdióban rögzítették, ahol professzionális Tascam berendezéseket használnak. A világ minden jelentôs stúdiójában a felvételi és a gyártási folyamat részei a Tascam gépek. 

A Tascam – mint a TEAC Corporation tagja – termékei mellett a TEAC nevéhez fûzôdik még számos olyan terület, amely az adatrögzítéssel kapcsolatos. Ilyenek például azok a precíziós, mérnöki pontossággal megtervezett és elkészített, a repülésben, ûrkutatásban és orvostudományban alkalmazott adatrögzítô és lejátszó készülékek, melyek minôségén és megbízhatóságán sokszor emberi életek múlhatnak. 

A mindennapokban pedig szinte már mindenki találkozott a TEAC számítástechnikában használatos CD/DVD lejátszóival, CD/DVD íróival és TAEC márkanévvel ellátott CD illetve DVD lemezekkel is. 

A TEAC termékek megbízhatóságát fémjelzik azok a vezetô számítástechnikai cégek is, melyek termékeikben is a csúcsminôségû TEAC CD/DVD olvasókat használják. 

A hifi és a High End világában azonban minden zenerajongó tisztában van azzal, hogy a TEAC tervezte a világ legprecízebb, vibrációmentes VRDS (Vibration-free Rigid Disc-clamping System) CD mechanikáját is. 


Erről a termékről még nem érkezett vélemény.
Árukereső.hu Árukereső.hu